Grip Neck Pintles

M10 Retro-fit Grip Neck Pintle

with Grip Neck Adaptors

Code

Shape

Meterial

Adaptor Size

Tube Size I.D.

O.D.

Wall

S11

Round

Nylon

11mm 7/16”

10.9

12.7

0.9

S14

Round

Nylon

14mm ⁹/₁₆”

13.6

16.0

1.2

S17

Round

Nylon

17mm 1¹/₁₆”

16.6

19.0

1.2

S17SQ

Square

Nylon

17mm 1¹/₁₆”

16.6

19.0 SQ

1.2

S19

Round

Nylon

19mm ³/₄”

19.0

22.2

1.6

Code

Size

S23

Round

Nylon

23mm 7/8”

23.0

25.4

1.2

-GN

8mm OD x 39mm ⁵/₁₆” OD x 1 ⁹/₁₆”

S23SQ

Square

Nylon

23mm 7/8”

22.0

25.4 SQ

1.6

Pintle Bolts

with M10 Threaded Tube Ends

Round M10 Threaded Tube Ends

Square M10 Threaded Tube Ends

Rectangular M10 Threaded Tube Ends

Click here to view tube ends

with ³/₈” Fittings

Code

Part

Information

38WTEE

Drill a 12mm (¹/₂”) hole through the base and fit this down from the top, and screw the castor up into it through a washer.

Code

Size (thread x length)

100.M10x30

M10 x 30mm M10 x 1 ³/₁₆”

100.M10x40

M10 x 40mm M10 x 1 1¹/₁₆”

38WNUT

The base must be 3mm (¹/₈”) thick, or washers of at least 25mm (1”) OD used on both side to spread the load.

100.M10x50

M10 x 50mm M10x 2”

100.³/₈x19

³/₈” x 19mm ³/₈” x ³/₄”

100.³/₈x30

³/₈” x 30mm ³/₈” x 1 ³/₁₆”

ENDPLUG25

Fits horizontal 1” x 1.6 square tube. Holds a ³/₈” Whit nut in position 32mm (11/4”) along a horizontal tube.

100.³/₈x40

³/₈” x 40mm ³/₈” x 1 1¹/₁₆”

100.³/₈x50

³/₈” x 50mm ³/₈” x 2”

Use standard M10X40 bolt to attach castors to these tube ends.

Pintle Bolts

with Expanding Adaptors

with M12 Threaded Tube Ends

Round M12 Threaded Tube Ends

Square M12 Threaded Tube Ends

Rectangular M12 Threaded Tube Ends

Click here to view Tube Ends

Code

Shape

Material

Size

Tube Size

I.D. Range

with ¹/₂” Solid Pintles

The -AS22 stem consists of the 19mm (³/₄”) round solid stem, fitted with a square nylon sleeve

Steel

Stainless

Code

Part

Size (diameter x length)

-ER19

-ER19SS

Round

Nylon

19mm

18.5 - 21.0

-E

Bolt only

M12x81 Standard (0.5” x 3.187”)

-ER22

-ER22SS

Round

Nylon

22mm

21.5 - 24.0

-ESS

Bolt only

M12x65 Stainless Stl (0.5”x 2.562”)

-ER22R

-ER22RSS

Round

Rubber

22mm

21.5 - 24.0

-E12x35

Bolt only

M12x35 (0.5” x 1.375”)

-ER28

-ER28SS

Round

Nylon

28mm

25.0 - 28.0

-E12x40

Bolt only

M12x40 (0.5” x 1.562”)

-ES19

-ES19SS

Square

Nylon

19mm

18.5 - 21.0

Code

Stem O.D.

Tube Size

OD x wall

Cross Drill Hole

distance from end

x hole diameter

-E12x45

Bolt only

M12x45 (¹/₂” x 1 ³/₄”)

-ES22

-ES22SS

Square

Nylon

22mm

21.5 - 24.0

-E12x50

Bolt only

M12x50 (¹/₂” x 2”)

-ES22R

-ES22RSS

Square

Rubber

22mm

21.5 - 24.0

-AR19

19.0mm round

22 x 1.2mm

19.0 x 8mm (0.852” x ⁵/₁₆”)

-E12x55

Bolt only

M12x55 (¹/₂” x 2 ¹/₈”)

-ES28

-ES28SS

Square

Nylon

28mm

21.5 - 24.0

-AR22

22.0mm round

25 x 1.6mm

19.0 x 8mm (1” x ⁵/₁₆”)

-E12x65

Bolt only

M12x65 (0.5” x 2.562”)

Expanding adaptors can confidently be used on castors up to 125mm (5”)

wheel diameter and 150kg (330lb) load capacity (and up to 200mm (8”) castors

only at lighter usage and loads <80kg). The castor and adaptor are ordered as two separate items e.g. MSQ125G/MZH (castor) AND (on the next line) -ER22 (the pintle and adaptor). The factory will assemble them prior to despatch. If ordering the above castor with the stem only (no adaptor required) The order should read: MSQ125G/MZH (castor) AND (on the next line) -E the pintle only. The factory will assemble them prior to despatch. If ordering the adaptor as a spare part add ‘SP-ADAP’ to the part number, i.e. SP-ADAPER22.

-AS22

-AR19 with adaptor

22.0mm square

25 x1.6mm SQ

19.0 x 8mm (0.852” x ⁵/₁₆”)

-E¹/₂x30

Bolt only

¹/₂” UNF x 1 ¹/₈”

-AR28

-28.0mm round

32 x 1.6mm

19.0 x 8mm (³/₄” x ⁵/₁₆”)

-E¹/₂x40

Bolt only

¹/₂” UNF x 1 ⁹/₁₆”

The castor and pintle are ordered as two separate items e.g. MSQ125G/MZH (castor) AND (on the next line) -AR22 (the pintle). The factory will assemble them prior to despatch.

If ordering the pintle only, add ‘SP’ (spare part) to the part number e.g. SP-AR22.

-E¹/₂x50

Bolt only

¹/₂” UNF x 2”