AAA Custom Trolleys - Wheels & Castors

	Wheel Specifications
	Wheel Code	Capacity per each	Diameter x Width	Hub Width X Bore	Bearing Type
Lawn mower wheels TPE tyred flat profile wheels For use on lawn mowers, BBQs, and other equipment needing a flat profile wheel.	AVP150	30kg 65lb	150x46 6x1¹³/₁₆”	38x¹/₂” 1¹/₂x¹/₂	Plain
	AVP175		175x46 7x1¹³/₁₆”
	AVP200		200x49 8x1¹⁵/₁₆”
Polisher/Scrubber wheel Grey tyred non-marking. Specially developed for floor polishers/scrubbers and other applications needing a non-marking tyre. Centre is white polypropylene, fitted with either plain bearings or ball bearings. The wheel is offset so the axle does not stick out.	PSA200(C)	80kg 175lb	200x32 8x1¹/₄”	38x¹/₂” 1¹/₂x¹/₂	Plain
	PSB200(C)				Cone
Rubber tyred wheel - blue Advantages:Non-markingHighest resilience of solid tyres - for easiest rolling over bumps Longest life Disadvantages: Resilient wheels get harder to push at higher loadings	JBA100	150kg 330lb	100x32 4x1¹/₄”	45x¹/₂ 1³/₄”x¹/₂”	Plain
	JBR100			45x20 1³/₄”x20	Roller
	JBA125	180kg 395lb	125x35 5x¹⁵/₁₆”	45x¹/₂ 1³/₄”x¹/₂”	Plain
	JBR125			45x20 1³/₄”x20	Roller
	HBA150	180kg 395lb	150x40 6x1⁹/₁₆”	60x20 2³/₈”x20	Plain
	HBR150				Roller
	HBA200	200kg 440lb	200x50 8x2”		Plain
	HBR200				Roller
Nylon - general purpose These non-rusting, non-scratching wheels have many uses such as toys, trolleys, mechanical handling devices, replacements in castors, etc. Nylon can be used from -30°C up to +100°C for short periods and longer periods between 0°C up to 80°C. It can be used in wet conditions, but it cannot be constantly immersed. Good resistance to most chemicals. Roller bearings recommended at heavier loads.	LNN50	30kg 65lb	50x20 2”x³/₄”	25x¹/₄” 1x¹/₄	Plain
	KNN65	60kg 135lb	65x23 2¹/₂x⁷/₈”	30x12 † 11/8”x12mm
	KNN75	65kg 135lb	75x23 3x⁷/₈”
	MNN75*	100kg 220lb	75x32 3x1¹/₄”	40x12” † 1⁹/₁₆”x12mm
	KNN100	70kg 155lb	100x23 4x⁷/₈”	30x12 † 11/8”x12mm
JNN100 - plain bearing moulded as part of wheel. (Axle bushes fitted to all ‘N’ bearing wheels except LNN50)	MNN100*	150kg 330lb	100x32 4x1¹/₄”	40x12” † 1⁹/₁₆”x12mm
	JNN100*	280kg 615lb	100x32 4x1¹/₄”	45x¹/₂” 1³/₄x¹/₂
ONA100 - plain bearing installed	JNR100			45x20” Ÿ 1³/₄”x20mm	Roller
	ONA100*	350kg 770lb	100x40 4x1⁹/₁₆”	60x¹/₂” 2³/₈x¹/₂	Plain
	ONR100				Roller
	MNN125*	150kg 330lb	125x35 5x1³/₈”	40x12” † 1⁹/₁₆”x12mm	Plain
	JNN125	300kg 660lb		45x¹/₂1³/₄x¹/₂
JNR100 - roller bearing inserted	JNR125	350kg 770lb		45x20” Ÿ 1³/₄”x20mm	Roller
	ONA125*	400kg 880lb	125x40 5x1⁹/₁₆”	60x¹/₂” 2³/₈x¹/₂	Plain
	ONR125				Roller
	ONA150*		150x40 6x1⁹/₁₆”	60x20”2³/₈x³/₄	Plain
WNQ150 - precision bearing.	ONR150				Roller
	WNQ150	600kg 1320lb			Cone
	ONA200*	400kg 880lb	200x40 8x1⁹/₁₆ ”		Plain
Also available in natural (milky white translucent) † Includes 12mm axle bush reducing to 8mm Ÿ Includes 20mm axle bush reducing to 10mm * Includes ¹/₂” axle bush reducing to 10mm ^ Includes 20mm axle bush reducing to ¹/₂”	ONR200				Roller
	WNQ200	600kg 1320lb			Cone